罗明


的个人主页 http://teacher.nwpu.edu.cn/luoming

基本信息 The basic information

罗明

机电学院

博士研究生毕业

博士

副研究员(自然科学)

航空宇航科学-航空宇航制造工程

luoming@nwpu.edu.cn

工作经历 Work Experience

2017.07-至今:西北工业大学  副研究员 

2012.11-2017.06:西北工业大学  助理研究员

2012.04-2012.10 西北工业大学 机械工程博士后 

教育经历 Education Experience

2007.09-2012.03 西北工业大学机电学院,航空宇航制造工程,博士 

2005.09-2008.04 西北工业大学机电学院,航空宇航制造工程,硕士 

2004.07-2005.07 西北工业大学机电学院,飞行器制造工程,学士 

2001.09-2004.06 西北工业大学,教改班 

教育教学 Education And Teaching

本科生课程:

Computer Aided Design and Manufacturing

Mechanical Vibration

硕士生课程:

Fundamental Theory of NC Machining

 Intelligent Machining Technology 

科学研究 Scientific Research

主要研究方向:?智能加工、加工过程监测及数据处理、加工动力学、多轴数控加工编程

主持的科研项目

国家自然科学基金

  • 51675438,航空发动机零件切削加工现场数据的处理、积累与进化机制,2017-2020
  • 51611130191?,基于嵌入式传感器的薄壁件铣削加工过程监测方法研究,2016-2018
  • 51305354?,航空复杂薄壁件铣削加工界面耦合作用与系统响应机制研究,2014-2016
产学研合作项目
  • 高效铣加工技术
  • 材料切削加工性能研究
参与的科研项目:
973课题
  • 复杂薄壁件切削加工过程的演化模型及其自适应进化机制
国家自然科学基金
  • 51575453?,航空发动机难加工材料切削基础数据模型与标准试验方法
  • 51475382?,航空薄壁环形件多轴加工的时变动力学模型及其稳定性分析
  • 51475381,复杂薄壁件高效高精多轴加工的几何建模与工艺优化

学术成果 Academic Achievements

[J1] C. Han, D. Zhang, M. Luo, et al. Chip evacuation force modelling for deep hole drilling with twist drills. International Journal of Advanced Manufacturing Technology [J], 2018, DOI: 10.1007/s00170-018-2488-6

[J2] M. Luo, H. Li. On the Machinability and Surface Finish of Superalloy GH909 Under Dry Cutting Conditions. Materials Research [J], 2018, 21(4).

[J3] J. Wang, M. Luo, H.M. Hafeez, et al. Image Skeleton and GA Based Tool Selection for 2 1/2-Axis Rough Milling. IEEE Access [J], 2018, 6:32566-32575.

[J4] 王晶, 罗明, 吴宝海, 张定华. 航空发动机机匣摆线粗加工轨迹规划方法. 航空学报[J], 2018, 39(6):221-232.

[J5] Z. Zhang, M. Luo, D. Zhang, et al. A force-measuring-based approach for feed rate optimization considering the stochasticity of machining allowance. International Journal of Advanced Manufacturing Technology [J], 2018, 97(5-8): 2545-2556.

[J6] J. Mei, M. Luo, J. Guo, et al. Analytical Modeling, Design and Performance Evaluation of Chatter-Free Milling Cutter With Alternating Pitch Variations [J]. IEEE Access, 2018, 6:32367-32375.

[J7] Q. Yao, B. Wu, M. Luo, D. Zhang. On-line cutting force coefficients identification for bull-end milling process with vibration [J]. Measurement, 2018, 125:243-253.

[J8] M. Luo, H. Luo, D. Axinte, et al. A wireless instrumented milling cutter system with embedded PVDF sensors [J]. Mechanical Systems and Signal Processing, 2018, 110:556-568.

[J9] M. Luo, H. Luo, D. Zhang, K. Tang. Improving tool life in multi-axis milling of Ni-based superalloy with ball-end cutter based on the active cutting edge shift strategy [J]. Journal of Materials Processing Technology, 2018, 252:105-115.

[J10]   Q. Yan, M. Luo, K. Tang. Multi-axis variable depth-of-cut machining of thin-walled workpieces based on the workpiece deflection constraint [J]. Computer-Aided Design, 2018, 100:14-29.

[J11]   Q. Yao, M. Luo, D. Zhang, B. Wu. Identification of cutting force coefficients in machining process considering cutter vibration [J]. Mechanical Systems and Signal Processing, 2018, 103:39-59.

[J12]   M. Luo, J. Wang, B. H. Wu, et al. Effects of cutting parameters on tool wear in end milling of titanium alloy Ti6Al4V [J]. Chinese Journal of Mechanical Engineering, 2017, 30(1):53-59

[J13]   M. Luo, J. W. Mei, D. H. Zhang. Time domain model of milling cutter exit workpiece process [J]. Chinese Journal of Aeronautics, 2016, 29(6):1852-1858

[J14]   M. Luo, D. S. Liu, H. Luo. Real-time Deflection Monitoring for Milling of Thin-walled Workpiece by Using PVDF Thin-film Sensors with Cantilevered Beam as a Case Study [J]. Sensors, 2016, 1470; doi:10.3390/s16091470

[J15]   M. Luo, D. Q. Yan, B. H. Wu, et al. Barrel cutter design and toolpath planning for high-efficiency machining of freeform surface [J]. International Journal of Advanced Manufacturing Technology, 2016, 85(9):2495–2503

[J16]   K. Xu, M. Luo, K. Tang. Machine based energy-saving tool path generation for five-axis end milling of freeform surfaces. Journal of Cleaner Production, 2016, 139:1207-1223

[J17]   M. Luo, D. H. Zhang, B. H. Wu, et al. Material removal process optimization for milling of flexible workpiece considering machining stability [J]. IMechE, Part B: Journal of Engineering Manufacture, 2011, 225(8):1263-1272. 

[J18]   M. Luo, D. H. Zhang, B.H. Wu, Y. Zhang. Optimisation of spiral tool path for five-axis milling of freeform surface blade. International Journal of Machining and Machinability of Materials, 2010,8(3/4):266-282.

[J19]   罗明, 吴宝海, 李山, . 自由曲面五轴加工刀轴矢量的运动学优化方法. 机械工程学报, 2009,45(9):158-163. 

[J20]   M. Luo, B. H. Wu, D. H. Zhang, et al. Toolpath Generation for Four-axis Rough Milling of Sculptured Surface Turbine Blade. Lecture Notes in Computer Science, 2008, 5315:887-895. 

[J21]   罗明, 吴宝海, 张定华, . 一种带缘头避让的叶片高效螺旋加工方法. 机械科学与技术, 2008,27(7):917-921.

[J22]   张定华, 罗明, 吴宝海, . 智能加工技术的发展与应用. 航空制造技术, 2010, (21):40-43.

[J23]   李山, 罗明, 吴宝海, . 一种利用点搜索的多曲面体清根轨迹生成方法. 西北工业大学学报, 2009,27(3):351-356. 

[J24]   吴宝海, 罗明, 张莹, . 自由曲面五轴加工刀具轨迹规划技术的研究进展. 机械工程学报, 2008,44(10):9-18. 

[J25]   B.H. Wu, X. Yan, M. Luo, et al. Cutting Force Prediction for Circular Peripheral Milling Process. Chinese Journal of Aeronautics, 2013, 26(4):1057-1063.

[J26]   M. Tang, D. H. Zhang, M. Luo, et al. Tool Path Generation for Clean-up Machining of Impeller by Point-searching Based Method. Chinese Journal of Aeronautics, 2012,25(1): 131-136.


[C1] M. Luo, Y.F. Hou, D.H. Zhang. Feedrate optimization for worn cutter with measured cutting force in rough milling. 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Canada, July 12-15, 2016.

[C2] M. Luo, X.F. Zhang, B.H. Wu. Damping support fixture for vibration suppression in milling of thin-walled casing. 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Busan, Korea, July 7-11, 2015.

[C3] M. Luo, X.F. Zhang, D.H. Zhang, B.H. Wu. On-line compressor blade stiffness enhancement in multi-axis machining process by controlling of tension force. IFAC-PapersOnLine, 2015, 48(3):664-667.

[C4] M. Luo, D.H. Zhang, B.H. Wu, M. Tang. Modeling and Analysis Effects of Material Removal on Machining Dynamics in Milling of Thin-walled Workpiece. 13th CIRP Conference on Modeling of Machining Operations (CIRP CMMO 2011), Sintra, Portugal, 2011. 

[C5] M. Luo, D.H. Zhang, B.H.Wu, F.Y. Han. Tool Orientation Control Using Quaternion Interpolation in Multi-axis Milling of Blade. International Conference on Manufacturing Automation 2010, HongKong, 2010. 

[C6] M. Luo, D. H. Zhang, B.H. Wu, S. Li. Clean-up tool-path generation for multi-patch solid model by searching approach. International Conference on Advanced Design and Manufacture, Sanya, 2008. 

综合介绍 General Introduction

主要从事智能加工、加工过程监测与数据处理、加工动力学等方面的研究,担任International Journal of Machine Tools and Manufacture, Computer-Aided Design, Journal of Computational Design and Engineering, Journal of Industrial and Production Engineering, Noise Control Engineering Journal等期刊的审稿人。中国工程院第四届中美工程前沿研讨会先进制造组中方代表。主持国家自然科学基金 3 项,参与973课题1项,国家自然科学基金4项。